Download Print this page

Specifications - Konig VID-TRANS12KN Manual

2.4ghz audio/video system transmitter & receiver

Advertisement

Specifications:

Transmitter:
Operating Frequency Band
Maximum Output Level
Modulation
Channels (4)
Video Input Level
Audio Input Level
Input Port
Antenna
IR–remote IR output
Power
Dimensions
Receiver:
Operating Frequency Band
Sensitivity
Channels (4)
Video Output Level
Audio Output Level
Output Port
Antenna
Transmit Frequency
IR remote modulation
Infrared Freqeuncy Input
Power
Dimensions
System:
Operational range
Remote control range
Operating temperature
*Actual range depends on environment circumstances.
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from mains
and other equipment if a problem should occur.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the
product or damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
Copyright ©
2.400GHz~2.4835GHz
10dBm (CE)
FM (video and audio)
PLL frequency synthesizer
1V p-p @ 75 ohm
1V p-p @ 600 ohm (STEREO)
3.5mm plug
Omni-directional
940nm with ON/OFF keying
7.5VDC,300mA
90mm 74mm 20mm
2.400GHz~2.4835GHz
-80dBm minimum
PLL frequency synthesizer
1V p-p @ 75 ohm
1V p-p@ 600 ohm (STEREO)
3.5mm plug
Omni-directional
433.92 MHz
ASK
32 KHz~38 KHz
7.5 VDC, 300mA
90mm 74mm 20mm
up to 100 meter (line of sight)
up to 50 meter (line of sight)
10°C ~ 50°C (14 F ~ 122 F)
4
EN

Advertisement

loading