Technical Specifications - Konig DVB-TFT A10 Manual

A.2 TECHNICAL SPECIFICATIONS
1.Tuner & Demodulator
RF input Connector IEC type, Female
RF output connector IEC type, Male
RF Frequency Range 47MHz to 862MHz`
Input Impedance 75Ω Unbalanced
Input Signal Level -78 dBm to -20dBm
IF Frequency 36.167 MHz
IF bandwidth 7/8MHz
Demodulation COFDM
2.A/V Decoding
Transport Stream MPEG-2 ISO/IEC 13818Transport Stream Specification
Profile Level MPEG-2 MP@ML
Input Rate Max,60 Mbit/s
Aspect Ratio 4:3,16:9 (Letter Box)
Video Resolution 720 x 576
Audio Decoding MPEG Layer 1 & 11
Audio Mode Single Channel / Dual Channel - Joint Stereo / Stereo
Sampling Rate 32,44.1 & 48 KHz
Graphic Engine 3-OSD Plane 1-Background Plane / 256 Full Color
3.Main system
CPU STi 5518
Flash Memory 2 Mbytes
Graphic SDRAM 4 Mbytes
System Memor y 4 Mbytes
4.A/V Data In/Out
TV SCART Video Output (CVBS,RGB)
Audio Output
VCR SCART Video Output (CVBS)
Video Input (CVBS,RGB)
Audio Output
AUDIO R/L RCA/Cinch Volume & Mute Control
RS-232C Transfer Rate 115.2 Kbps
9 Pin D-sub type
5. Power Supply
Input Voltage 100 to 240 VAC, 50Hz/60Hz
Type SMPS
Power Consumption Max.35W
26