QUICK START GUIDE
Built-in oven
NZ AU GB IE
Keep this document handy for easy reference.
For detailed information on the other features of your oven, see your 'User guide'.
Before using your oven, make sure you read the full 'User guide', with special attention to the 'Safety and warnings' section.
For contact information or if you require service, assistance or replacement parts, see the end of this document or your 'Service & warranty'
booklet.
YOUR OVEN
1
Control panel
Oven vent louvres
2
Step down oven wire shelf
3
Oven light
4
5
Telescopic sliding shelf (x2)
Side rack
6
Oven wire shelf
7
Oven door and handle
8
9
Oven seal
OB60SL11DCPX1
OB60SL11DEPX1
Accessories:
Meat probe
10
11
Grill rack
12
Smokeless grill tray
Deep Roasting dish
13
Flat baking tray
14
THE CONTROL PANEL
Function indicators
(see 'Oven functions')
Rotisserie indicator
(see 'Using the
Rotisserie') in the
User guide
if lit:
Control lock indicator (see
Rotisserie is
'Locking the control panel')
in use
if lit:
Control panel is locked
Locking the control panel
To lock, press and hold the select
button for 2 seconds.
To unlock, press and hold the
cancel
button for 2 seconds.
Door lock indicator
if lit:
Door is open when Self
Clean function selected.
See 'Using the Self Clean
function' in User guide.
9
1
2
3
4
5
6
7
8
Function dial
Temperature
indicator
Function halo
F
U
N
C
T
O I
N
Timer indicator
(see 'Using the
timer')
Cooking time indicator (see 'Automatic cooking') in User guide
if lit:
if lit:
Timer is
Automatic cooking time is set
counting down
Display
Meat probe indicator
(see 'Using the meat probe') in User guide
if lit:
Meat probe is in use
(display will alternate between probe set
temperature and internal temperature
of the meat)
Stop time indicator
Scroll
Select
Cancel
(see 'Automatic cooking') in User guide
if lit:
Automatic stop time is set
SETTING THE CLOCK
You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.
Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel button to exit the clock setting.
If you want to set the clock later, follow the steps under 'To change the time' .
When the oven is first switched on at the wall
10
24 H r.
The display will flash
1
11
12
13
14
Press the left and right scroll
3
buttons to set the time.
FIRST USE
Temperature
Your oven comes with one wire shelf, two telescopic sliding shelves and a drop down wire shelf.
Temperature
dial
halo
The following shows you how to remove and reposition the shelves to your preferred position
We recommend you then condition the oven.
E T
M
P
R E
T A
U
E R
1 REMOVE ALL CABLE TIES & PACKAGING
HOLDING THE SHELVING IN PLACE
Press the right scroll
button to scroll
2a
1
24 H r
12 H r
between
and
2b
Press the select
button to confirm.
2
3
Press the select
button to
4
confirm.
2 REMOVE SHELVES FROM THE OVEN
1
Remove all the shelving, taking special care with the telescopic
sliding shelves.
To remove a telescopic sliding shelf, grip it at the front (making
2
sure you are gripping the wire shelf and the sliding frame
together), lift upwards and pull it out of the oven.
For your safety, the wire shelf and telescopic sliding frame are
built together as one unit and are not separable.
To change the time
(within the user preference menu)
Press and hold the left and right scroll
buttons together for 3 seconds
to enter the user preference menu.
12 H r
24
The display will either show
or
H r
Press the select
button to confirm.
The display will flash.
Follow steps 2-5 left to set the time.
At step 2a, you also now have the
24 H r
ability to scroll between
,
12 H r
OFF
and
(turns the display off ).
Refer to the User guide to learn more
about this feature.
continued over
Need help?
Do you have a question about the OB60SL11DCPX1 and is the answer not in the manual?
Questions and answers