Mounting; Orientation; Rigging - Chauvet Strike 882 User Manual

Setup

Mounting

Orientation

Rigging

Procedure The STRIKE™ 882 comes with a yoke bracket to which you can either attach mounting
Mounting Diagram
-8-
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this
product.
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product's weight. See the
requirements of this product.
· When hanging this product, always secure to a fastening device using a safety cable.
clamps for hanging or simply use as a floor stand. You must supply your own mounting
clamps. Make sure the clamps are capable of supporting the weight of this product. Use
at least one mounting point per product.
Mounting Clamp
(such as CLP-15 or
CLP-15N from CHAUVET®)
Floor Mounting
Safety
Technical Specifications
Safety Cable
(such as CH-05
from CHAUVET®)
Overhead Mounting
Notes.
for the weight-bearing
STRIKE™ 882 User Manual Rev. 2