Samsung SCV-2081R User Manual page 26

setup

M

2_ setup
V-2081R-ENG.indd 26
ImAGe ADJ :
1) When the SPECIAL menu screen is displayed, select 'IMAGE ADJ' by using
the Function Setup switch so that the arrow indicates 'IMAGE ADJ'.
2) Select a desired mode using the Function
Setup switch.
- V-REV : You can flip the picture vertically
on the screen.
- H-REV : You can flip the picture
horizontally on the screen.
- D-ZOOM : You can use a digital zoom
of x1 ~ x16.
- FONT COLOR : You can change the OSD font color.
(White, Yellow, Green, Red, Blue)
- SHARPNESS : As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness
of the picture.
- RETURN : Select this to save the settings for the IMAGE ADJ menu and to
return to the SPECIAL menu.
If you increase the SHARPNESS level too high, the picture may become
distorted or noise may appear.
monitor : Please change the settings value of video appropriate to your monitor.
LCD : Please select this menu item
-
when using an LCD monitor.
You can change the gamma,
PED level and color gain in the
sub menus.
- CRT : Please select this menu item
when using a CRT monitor.
- USER : Please use this menu item when using a monitor other than standard
ones. You can change the gamma, PED level and color gain in the sub
menus.
IMAGE SETUP
▶ 1.V-REV
2.H-REV
3.D-ZOOM
4.FONT COLOR
5.SHARPNESS
6.RETURN
LCD MONITOR
▶ GAMMA
PED LEVEL
IIIII  IIIIIIIIIIIIIIII
COLOR GAIN
IIIIIIIIIIIIIII  IIIIII
RESET
Press SET to Return
OFF
OFF
OFF
WHITE
ON
0.55
17
50
2010-12-17 14:29:1