Samsung SCV-2081R User Manual page 19

eXpOSURe
1.
2.
M
V-2081R-ENG.indd 19
When the SETUP menu screen is displayed,
select EXPOSURE by using the Function
Setup switch so that the arrow indicates
'EXPOSURE'.
Select a desired mode using the Function
Setup switch.
bRIGHTNeSS : Adjusts the video brightness.

SHUTTeR : You can select shutter mode.

ESC : Select this to control the shutter
-
speed automatically. If ESC is
selected, the shutter speed
is automatically controlled
depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
A.FLK : Select this when you experience picture flicker, this happens when
-
there is a clash with the installed lighting frequency.
- ---: Shutter speed is fixed at 1/60sec(1/50sec).
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing
the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Set the shutter mode to --- if color rolling occurs.
AGC (AUTO GAIN CONTROl) : The higher the gain level, the brighter the screen

- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
HIGH : Allows automatic gain control from 5.3dB to 37dB.
-
1.LENS
▶ 2.EXPOSURE
3.WHITE BAL
EXPOSURE SETUP
▶ 1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
but the higher the noise.
MAIN SETUP
DC
ATW
IIIIIIIIIIIIIIIIIIIII 25
---
HIGH
OFF
English_1
2010-12-17 14:29:1