Using Coaxial Communications - Samsung SCV-2081R User Manual

connection
* Standard voltage for camera operation : DC 12V ±10%, AC 24V ± 10%
* There may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
M

USING COAXIAl COmmUNICATIONS

Coaxial Communications System

OSD Control method

- Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial
cable, shown below : If the distance between the camera and the monitor exceeds
the recommended maximum, please use an auxiliary video amp.
M
1_ connection
V-2081R-ENG.indd 16
Be sure to connect power only after all the installation is complete.
Note that DC adaptor is not supplied with camera.
Ground should be connected to the GND terminal.
CAMERA
SET
UP
DOWN
LEFT
RIGHT
DVD RECORDER
OPEN/CLOSE
If the camera is controlled through coaxial communication, please use a video amp intended for
coaxial communications. Regular video amps do not transfer coaxial signals.
DVR
MENU/ENTER
UP KEY
DOWN KEY
LEFT KEY
RIGHT KEY
DVR
ALARM HDD NETWORK BACKUP REC
REC
1 2 3 4
5 6 7 8
ZOOM FREEZE BACKUP SEARCH
9 10 11 12
TELE WIDE VIEW PRESET
MODE AUDIO ALRAM MENU
13 14 15 16
USB
RETURN
Distance
300m
450m
600m
CONTROLLER
OSD KEY
JOYSTICK UP
JOYSTICK DOWN
JOYSTICK LEFT
JOYSTICK RIGHT
: BNC
•
• ---- : RS-
Recommended Cable Specifi cation
3C2V(RG-59/U)
5C2V(RG-6/U)
7C2V(RG-11/U)
2010-12-17 14:29:1