Battery Life Indicator; Power Management - Targus Wireless numeric keypad User Manual

Targus Wireless Numeric Keypad
Re-Establishing a New Connection
If the response time of the keypad is slow or it intermittently stops working:
1. Unplug the USB receiver from the computer.
2. Plug the USB receiver into another available USB port and the LED
indicator will flash for 1 minute to indicate pairing mode is activated.
3. Power on the keypad and press the reset button to re-establish a new
connection.

Battery Life Indicator

The light will turn on when the power is low and batteries need to be
replaced.

Power Management

• To extend the life of your battery, turn off the keypad while travelling or
when you're not using it.
5