Installing The Battery - Targus Stow-N-Go AKP01US User Manual

Targus Wireless Stow-N-Go

Installing the Battery

Battery
Cover
1. Remove the battery cover from the back of the keypad.
2. Insert the supplied battery, making sure that thepositive (+) and
negative (-) ends match the polarity indicators inside the battery
housing.
NOTE: WHEN REPLACING THE BATTERY, YOU MAY USE ALKALINE OR OTHER
HEAVY-DUTY NIMH BATTERY.
3. Slide the battery cover back into position until it"clicks" firmly into
place.
Keypad - back view
4
TM
Keypad
Receiver