9.2 STP Port Settings
Port No: The port ID. It cannot be changed. Aggregations mean any configured trunk group.
Root Path Cost: This parameter is used by the STP to determine the best path between devices.
Therefore, lower values should be assigned to ports attached to faster media, and higher values
assigned to ports with slower media. Set the RSTP path cost on the port. Number between 0 -
200000000. 0 means auto generated path cost.
State: Show the current port state includes designated port, root port or blocked port.
Status: Show the current port status includes forwarding, disable etc...
25
ES1625-31