Vlan Member - EverFocus ES1625-31 User Manual

setting for your Up- and Downlink Ports in your VLAN Tagged Network.
 Don't care means the outgoing packet of the selected port keep the original packet received at
the source port. This is the default setting when starting VLAN configuration. You should
change to either Add or Remove Tag.
 Remove tag means the 802.1Q tag of the outgoing packet of the selected port will not be sent.
Use this setting for your Network Connections to PCs. Only packets of the VLAN Group the Port
is member of will be sent.

6.2 VLAN Member

The ports need to be made member of your VLAN groups. This is for Tag Based and Port Based
VLAN Mode. The screen here looks different whether you run Tag Based or Port Based Mode.
VLAN Member in Port Based Mode
In Port Based Mode you see a matrix of your 8 Ports. Simply select the port on top screen you
want to configure, click on Read, and then select or deselect the ports that are on the same VLAN
group. In this configuration mode you do not need to worry about defining VLAN groups and VLAN
IDs.
VLAN Member in Tag Based Mode
In Tag Based Mode you need to define and configure your VLAN groups. Since you want the
handover to other switches take place smoothly, the VLAN IDs (Numbers) need to be like on the
rest of your network. On other switches you may have the chance to configure names. These are
just for your reference. Only the numbers are important!
17
ES1625-31