Stp Port Settings - EverFocus ES2426-31 User Manual

10.2

STP Port Settings

 Port No: The port ID. It cannot be changed. Aggregations mean any configured trunk group.
Root Path Cost: This parameter is used by the STP to determine the best path between devices.

Therefore, lower values should be assigned to ports attached to faster media, and higher values
assigned to ports with slower media. Set the RSTP path cost on the port. Number between 0 -
200000000. 0 means auto generated path cost.
State: Show the current port state includes designated port, root port or blocked port.

Status: Show the current port status includes forwarding, disable etc...

Figure 8-2
26
ES2426-31