EverFocus ES1625-31 User Manual page 23

ES1625-31
There firstly add your VLAN Groups (identified throughout your network by unique and constant
numbers). Start with IDs from 100 and up. Keep in mind that some switches use "1" as the default,
while others use "4095" or "4096" as default. Starting with 100 gives you enough free room and
less compatibility issues.
So enter "100" in the field right of VID Setting, then select or deselect which ports are member of
that group. Your up- and downlink ports need to member of every existing group! Then click on
add. The new group with its setting will be displayed at the bottom of the screen.
With the PVID Setting you define to which VLAN group incoming traffic belongs. Consider the
example that Port 1 is member of group 100 and 101. A simple PC is connected to Port 1. If that PC
is now sending out data, with PVID you define if that data is for group 100 or 101.
18