Important Safety Instructions - Seiko 620 User Manual

IMPORTANT SAFETY INSTRUCTIONS

The following symbols are used in this User's Guide.
WARNING. Warning statements are used to indicate actions that may result in risk of severe
personal injury or loss of life.
CAUTION. Caution statements are used to indicate actions that may result in damage to the
printer or other property, or may result in risk of minor personal injury.
Warning
1． Use only the AC adapter provided with this printer, or an AC adapter that has been approved by
Seiko Instruments for use with this printer. Use of an incorrect AC adapter may cause risk of
overheating or fire.
2． Do not bend or place a heavy object on the power cord as it could damage the cord and result in risk
of electric shock or fire. Do not use the power cord if damaged or frayed.
3． The thermal head may become quite hot after printing. Be careful when changing labels and
cleaning the thermal head.
Caution
1． Never insert objects of any kind into this printer as they may touch dangerous voltage points or short
out parts, and may result in a risk of fire or electric shock. Never spill liquid of any kind on the printer.
2． This printer contains no user-serviceable parts. Do not attempt to service the printer yourself as this
can expose you to dangerous voltage points or other risks. Repair service should be performed by a
trained technician.
3． Do not use this printer near water or in extreme humidity.
4． Be sure to hold only the connector end of the power cord or interface cable when disconnecting.
Repeated pulling on the cable could damage the cable.
5． If any of the following conditions occur, turn off the printer and unplug the power cord from the power
outlet:
 The power cord is damaged or frayed.
 Liquid has been spilled on the printer or the printer has been exposed to rain or water.
 The printer does not recover from an error or the printer does not operate normally when the
operating instructions are followed.
 The printer exhibits a distinct change in performance, such as emitting a strange noise, odor or
smoke.
6． Before using your SLP, please remove the clear protective tape covering on the Print Engine Cover
and Roll Cover.
7． When the SLP is unused for a period of time without a label, rubber of the Platen may become stuck.
This condition may cause the printer malfunction. To avoid this, please keep a label loaded in the
SLP — even when not in use.
8． Do not use the SLP without closing the Print Engine Cover.
2