Off Line And On Line Mode; Changing A Label Roll - Seiko 620 User Manual

Off Line and On Line Mode

Pressing and releasing the Power Button toggles the printer between off line and on line mode. An
amber Status Light indicates that the printer is off line. There is no communication with the computer
when the printer is off line.
This feature is a handy way to stop printing so you don't waste labels while you delete labels from the
print queue.

Changing a Label Roll

This procedure describes how to remove and replace label rolls.
 You can load a different type of label at any time — you don't have to wait until all of the labels
have been used.
 When you run out of labels, the green Status Light on the front of the SLP flashes. If printing is
in process, a message appears on the PC telling you that the printer is out of labels.
Removing the Old Roll
CAUTION: DO NOT pull on the labels to remove them from the printer. This may cause labels
to get stuck inside the printer.
1． Tear off any printed labels. If labels aren't torn off, they may get jammed when you perform step 2.
2． Press and hold the Form Feed Button. The labels will reverse out of the SLP. If this does not work,
see "Adjusting the Position of Labels" to release the Platen to remove the labels
Loading the New Roll
Prepare and load the new label roll as described in "Loading a Roll of Labels".
17