Seiko 620 User Manual page 21

3． Release the pressure on the label stock by moving the Platen Release Lever forward. When you let
go of the Platen Release Lever, it goes back to the original position. Hold the Platen Release Lever
until the adjustment of the label position completes.
4． Realign the label stock so it is straight.
5． Return the Platen Release Lever.
6． Replace the Print Engine Cover, starting at the bottom, and push the top edge forward until the Print
Engine Cover snaps into place.
7． Make sure the labels feed through the paper inlet slot.
Release the platen lever
19