Watch A Connected Device; Use Ambilight - Philips 32PFL7605H User Manual

[Custom]: Allows you to customise and
•
store personal picture settings.
3. Press OK to confirm your choice.
4. Press to exit.
Use Smart sound settings
NonPu blish
Use the [Smart sound] experience bar to
access frequently-used sound settings.
1. While watching TV, press
2. Select [Smart sound], then select one of
the following settings:
• [Personal]: Sets the TV to your
personal preferences set in the [Sound]
menus in [Setup].
[Standard]: Adjusts sound settings to
•
suit most environments and types of
audio.
• [News]: Applies sound settings ideally
suited for spoken audio, such as the
news.
[Movie]: Applies sound settings ideally
•
suited for movies.
• [Game]: Ideal settings for gaming.
• [Drama]: Applies sound settings ideally
suited for drama.
• [Sports]: Applies sound settings ideally
suited for sports.
3. Press OK to confirm your choice.
4. Press to exit.
Change picture format
NonPu blish
Change the picture format to suit your
viewing experience.
1. Press .
2. Select a picture format, then press OK to
confirm your choice.
Note: Picture formats are also accessible via
the experience bar menu ( ) and [Setup]
menu.
The following picture formats can be
selected:
• [Auto fill]: Adjusts the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.
• [Auto zoom]: Enlarges the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.
EN 14
.
[Super zoom]: Removes the black bars
•
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.
• [Movie expand 16:9]: Scales the classic
4:3 format to 16:9. Not recommended
for HD or PC.
• [Wide screen]: Stretches the classic 4:3
format to 16:9.
[Unscaled]: Provides maximum detail
•
for PC. Only available when [PC mode]
is enabled in the [Picture] menu.
Notes:
• Depending on the picture source, some
picture formats are not available and
will not be seen on-screen.

Watch a connected device

Add new device
NonPu blish
Notes:
• Before watching a connected device,
you must add it to the home menu.
• HDMI ARC compliant devices
connected to the HDMI ARC
connector on the TV are automatically
added to the home menu.
1. Connect and switch on the device.
2. Press .
3. Select [Add your devices], then press
OK. Follow the on-screen instructions.
Watch connected device
NonPu blish
1. Press .
2. Select the device from the home menu.
3. Press OK to confirm your choice.

Use Ambilight

Switch Ambilight on
NonPu blish
Enjoy a more relaxed viewing experience
and improved perceived picture quality. Dim
the lighting conditions in the room for the
best Ambilight effect.