[Custom]: Allows you to customize
•
and store personal picture settings.
3. Press OK to confirm your choice.
4. Press
to exit.
Use Smart sound settings
NonPublish
Use the [Smart sound] experience menu to
access frequently-used sound settings.
1. While watching TV, press
2. Select [Smart sound], then select one of
the following settings:
•
[Personal]: Sets the TV to your
personal preferences set in the [Sound]
menus in [Setup].
[Standard]: Adjusts sound settings to
•
suit most environments and types of
audio.
•
[News]: Applies sound settings ideally
suited for spoken audio, such as the
news.
•
[Movie]: Applies sound settings ideally
suited for movies.
[Game]: Ideal settings for gaming.
•
•
[Drama]: Applies sound settings ideally
suited for drama.
[Sports]: Applies sound settings ideally
•
suited for sports.
3. Press OK to confirm your choice.
4. Press
to exit.
Change picture format
NonPublish
Change the picture format to suit your
viewing experience.
1. Press
.
2. Select a picture format, then press OK to
confirm.
Note: You can access picture formats via the
experience menu
The following picture formats can be
selected:
•
[Auto fill]: Adjusts the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.
•
[Auto zoom]: Enlarges the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.
EN
20
.
and the [Setup] menu.
[Super zoom]: Removes the black bars
•
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.
•
[Movie expand 16:9]: Scales the classic
4:3 format to 16:9. Not recommended
for HD or PC.
•
[Wide screen]: Stretches the classic 4:3
format to 16:9.
[Unscaled]: Provides maximum detail
•
for PC. Only available when [PC mode]
is enabled in the [Picture] menu.
Notes:
•
Depending on the picture source, some
picture formats are not available and
will not be seen on-screen.
Watch a connected device
Add new device
NonPublish
Notes:
•
Before watching a connected device,
you must add it to the home menu.
•
HDMI ARC compliant devices
connected to the HDMI ARC
connector on the TV are automatically
added to the home menu.
1. Connect and switch on the device.
2. Press .
3. Select [Add your devices], then press
OK. Follow the on-screen instructions.
Watch connected device
NonPublish
1. Press .
2. Select the device from the home menu.
3. Press OK to confirm your choice.
Use Ambilight
Switch on Ambilight
NonPublish
Enjoy a more relaxed viewing experience
and improved perceived picture quality. Dim
the lighting conditions in the room for the
best Ambilight effect.