Use A Cam - Philips 32PFL7605H User Manual

HDMI ARC allows you to use Philips
EasyLink to output TV audio directly to a
connected audio device, without the need
for an additional digital audio cable.
Be sure that the device is HDMI-CEC and
ARC compliant, and that the TV is
connected to the device using an HDMI
cable attached to HDMI ARC connectors.
Enable or disable HDMI ARC
Note: Enabling HDMI ARC automatically
adds the device to the home menu.
1. Press .
2. Select [Setup] > [Advanced TV settings]
> [EasyLink] > [HDMI 1 - ARC] > [On] or
[Off].
3. Press OK to activate.

Use a CAM

Insert and activate a CAM
NonPu blish
Caution: Be sure to follow the instructions
described below. Incorrect insertion of a
Conditional Access Module (CAM) may
damage both the CAM and your TV.
Notes:
• This TV supports CI as well as CI+. CI+
allows service providers to offer
premium HD digital programmes with a
high level of copy protection.
• Refer to the documentation from your
service operator on how to insert a
smart card into the Conditional Access
Module.
1. Switch off the TV.
2. Following the directions printed on the
CAM, gently insert the CAM into the
Common Interface at the side of the TV.
Push the CAM in as far as it will go.
3. Turn on the TV and wait for the CAM to
be activated. This may take several minutes.
Do not remove the CAM from the slot
when in use; removing the CAM will
deactivate digital services.
Access CAM services
NonPu blish
1. After inserting and activating the CAM,
press .
2. Select [Common interface], then press
OK.
3. Select a CAM application, then press OK.
The selected CAM application is enabled.
EN 53