Philips 32PFL7605H User Manual page 31

For a list of supported media server
software, read Technical data > Multimedia
(see "NonPublish" on page 58).
Note: If the apparatus does not return to
DLNA mode due to electrostatic discharge,
user intervention is required.
Wired installation
NonPu blish
Connect the router to the TV using a
network cable and switch on the router
before you start the network installation.
To start the wired network installation, close
> [Setup] >
the user manual, press
[Connect to network] and press OK.
Follow the instructions on screen to install
the wired network.
The TV constantly searches for a network
connection.
If asked, agree to the End User Licence
Agreement. Find the latest End User Licence
Agreement at (http://www.philips.com/).
Network settings
NonPu blish
The TV's network settings that are used to
connect to your router are standard and set
to automatic. This ensures easy connection
with any available network.
If you have problems with the network
connection, you might want to adjust the
settings so that they are appropriate for your
home network.
If you are unsure, ask someone with
knowledge of network settings to help you.
To set specific network settings, press >
[Setup] > [Advanced network settings] and
press OK.
EN 30