Philips 32PFL7605H User Manual page 49

Channel decoder
NonPu blish
Before using a SCART digital channel
decoder, select the channel to decode and
assign the decoder to the SCART connector.
1. Press .
2. Select [Setup] > [Advanced channel
settings] or [Advanced satellite settings] >
[Channel installation] > [Decoder] >
[Channel].
PC
NonPu blish
Connect a computer using one of the following cables:
HDMI cable
DVI-HDMI cable
EN 48
3. Set the channel you want to decode.
4. Select [Status], then the location of the
decoder.
5. Press OK.