Use Ambilight; Watch A Connected Device - Philips 56PFL9954H - User Manual

2.4 Use Ambilight

2.4.1 Ambilight on
With Ambilight, you will enjoy a more relaxed
viewing experience and improved perceived
picture quality.
Dim the lighting conditions in the room for the
best Ambilight effect.
To switch Ambilight on or off, press Ambilight on
the remote control.
‹ Caution
To avoid bad infrared remote control reception,
place your devices out of sight of Ambilight.
Dynamic speed
To adjust the speed at which Ambilight responds
to the onscreen images, press Ambilight for 3
seconds.
Adjust the dynamic speed with the onscreen
slider bar.
• Relaxed sets Ambilight to change softly and
smoothly.
• Dynamic sets Ambilight to change quickly and
is more responsive.
To change the dynamic speed, Active mode
needs to be set to a value greater than zero.
Press h > Setup > Ambilight > Active mode.
2.4.2 Ambilight settings
In the Ambilight menu you can set or adjust the
following Ambilight settings ...
While watching TV, press h > Setup >
Ambilight.
• Ambilight
Switches Ambilight on or off.
• Active mode
Adjusts the speed at which Ambilight responds
to the onscreen images.
• Brightness
Changes the light output of Ambilight.
24
UM_Bombay_56PFL9954_en.indd 24 UM_Bombay_56PFL9954_en.indd 24
• Colour
Sets the Ambilight colour to either dynamic
behaviour (Active mode) or one of the
predefi ned Ambilight constant colours.
• Custom allows fi ne tuning of a constant colour.
• Custom colour
To set a Custom colour select Custom in
Colour
• Separation
Sets the difference in colour level between the
lights at each side of the TV.
Separation off gives a dynamic but uniform
Ambilight colour.
2.4.3 LoungeLight
When the TV is in standby, you can switch
Ambilight on and create an Ambilight
LoungeLight effect in your room.
To switch Ambilight on while the TV is in standby,
press Ambilight on the remote control.
To change the LoungeLight colour scheme, press
Ambilight for 3 seconds.

2.5 Watch a connected device

When you have added a connected device
as an item to the Home menu, you can easily
and directly select that device to watch its
programme.
To add the device to the Home menu, read
2.2.3 Add your devices.
To watch TV from a connected device, press h
and select the device item in the Home menu.
Press OK.
If the connected device is not in the Home menu,
select the device from the Source menu.
Press Source s on the remote control, or at
the side of the TV, to show the source list.
Select the device or its connector and press OK.
2009-06-30 10:19:41 2009-06-30 10:19:41