Clearances - Heatilator RAVE4013I-C Owner's Manual

C. Clearances
NOTICE: Install appliance on hard metal or wood surfaces
extending full width and depth. DO NOT install directly
on carpeting, vinyl, tile or any combustible material other
than wood.
WARNING! Risk of Fire! Maintain specifi ed air space
clearances to appliance and vent pipe:
• Insulation and other materials must be secured to prevent
accidental contact.
• The chase must be properly blocked to prevent blown
insulation or other combustibles from entering and
making contact with fi replace or chimney.
• Failure to maintain airspace may cause overheating and
a fi re.
Note: Figure 5.2 shows the fi replace installed on the
fl oor. However, this fi replace can be elevated off the fl oor
provided that the fi replace is properly supported by framing
materials and the ceiling clearances are maintained.
D
A
Rough
Opening
(Vent Pipe)
Inches
8-5/8
Millimeters
219
* Adjust framing dimensions for interior sheathing (such as sheetrock)
Figure 5.2. Clearances to Combustibles
A
B
C
MINIMUM FRAMING DIMENSIONS*
B C
Rough Rough
Opening Opening Opening
(Height) (Depth)
42 1/4 18-1/4
1073 464
Heatilator • RAVE4013I-C • 2293-900 Rev. i • 4/14
F
D E F
Rough
Clearance Combustible
to Ceiling Floor
(Width)
50 31 0
1270 787 0
MEASURE FROM TOP
OF FIREPLACE OPENING
J
G
I
G H
Combustible Behind Sides of
Flooring Appliance Appliance
0 1
0 25 25
E
H
I J
Front of
Appliance
1 36
914
19