Table of Contents
Advertisement
Technical data concerning the cutting unit
Cutting unit
Cutting width, cm/inch
Cutting heights, 7 positions, mm/inch 25-127 / 0,98-5,0
Blade length, mm/inch
Width, mm
Weight, kg/lb
Bevel gear oil
Technical specifications for sound and vibration levels
Noise emissions (see note 2)
Sound power level, measured dB (A)
Sound power level, guaranteed dB(A)
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A)
Vibration levels (see note 4)
Vibration level on the steering wheel, m/s
Vibration level in the seat, m/s
Note 2: Noise emissions in the environment measured as sound power (L
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s
2
0.8 m/s
(seat).
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.
EC-declaration of conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel.: +46-36-146500, hereby declares that Husqvarna P 520D and P 525D from
2012's serial numbers and onwards (the year is clearly stated in plain text on the rating plate with subsequent serial number),
complies with the requirements of the COUNCIL'S DIRECTIVE:
of May 17, 2006 "relating to machinery" 2006/42/EC
of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The following harmonised standards have been applied: EN ISO 12100-2, EN-836.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, has issued reports regarding the
assessment of conformity according to annex VI of the COUNCIL'S DIRECTIVE of May 8, 2000 "relating to the noise emissions in
the environment" 2000/14/EC.
The certificates have the numbers: 01/901/165 , 01/901/166
Huskvarna 9 April 2012
Claes Losdahl, Development Manager/Garden Products (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
TECHNICAL DATA
Combi 132
132 / 52
490 / 19,3
1340 / 52,8
100/220
SAE 80W/90, capacity 0.4 l
Combi 132
2
2
WA
Combi 155
155 / 61
25-127 / 0,98-5,0
563 / 22.2
1594 / 62.8
131 / 289
SAE 80W/90, capacity 0.4 l
P 520D
Combi 155
102
105
103
105
88
90
1,7
1,7
0,7
0,7
) in conformity with EC directive 2000/14/EC.
P 525D
Combi 132
Combi 155
102
105
103
105
88
89
1,7
1,7
0,7
0,7
2
(steering wheel) and
English
– 55
Advertisement
Table of Contents
