Table of Contents
Advertisement
Presentation
Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years. This
operator's manual describes P 520D and P 525D.
P 520D and P 525D are equipped with hydraulic steering and
an equipment hoist.
The machines are equipped with four wheel drive.
The power transmission from the engine is handled by a
hydrostatic transmission, which allows variable variation of
the speed by using the pedals. One pedal for driving forward
and one for reverse.
Throttle trigger
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
To increase or reduce the engine speed the control is moved
forwards or backwards.
When driving the throttle control must be in the position for
maximum engine speed, work mode.
Speed limiter
The speed of the machine is steplessly regulated with two
pedals. Pedal (1) is used to drive forwards, and pedal (2) to
drive backwards.
1
2
WARNING! Make sure that branches do not
!
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.
12 –
English
PRESENTATION
Counter
The chronometer shows how many hours the engine has
been running.
Any time when the engine is not running but the ignition is
switched on is not registered. The last digit shows tenths of an
hour (6 minutes).
Parking brake
Operate the parking brake by moving the handle forwards.
Cutting unit
P 520D and P 525D can be equipped with two different cutting
units.
•
Combi 132
•
Combi 155
The Combi-unit, equipped with a BioClip-plug, finely chops
the cuttings to fertiliser. Without the BioClip-plug the unit
works in the same way as a rear ejection unit. The rear ejector
ejects the clippings behind the unit without finely chopping
them.
Advertisement
Table of Contents
