SMART 450 User Manual page 76

C H A P T E R 7
Using 3D Tools for SMART Notebook software and Mixed Reality Tools
To manipulate a 3D model using the mixed reality cube
1. Connect your SMART Document Camera to your computer and turn on the document camera.
2. Open the .notebook file, and then display the page containing the 3D model.
3. Place the mixed reality cube under the SMART Document Camera, showing one side of the
cube to the camera.
SMART Notebook software enters Mixed Reality mode and assigns the 3D model to the cube. If
there is more than one 3D model on the page, move the cube until the animation on the page
indicates that the cube is connected to the 3D model you want to manipulate.
N O T E
SMART Notebook software enters Mixed Reality mode in this situation only if a 3D model is
on the page. Alternatively, you can enter Mixed Reality mode by pressing SMART Document
Camera in the toolbar, and then pressing Start Mixed Reality
SMART Document Camera window.
70
in the