SMART 450 User Manual page 60

C H A P T E R 6
Using your SMART Document Camera in Playback mode
3. Press the and
4. Press the button on the control panel to make a selection.
5. Press the button on the control panel to close the menu.
Repeat steps 2–4 as needed.
To play a slide show
1. Connect your document camera directly to a projector or another display. For connection
information, see page 13
2. Set the USB switch to
OR
Insert an SD/SDHC card or a USB drive in the appropriate receptacle.
3. Press the button on the control panel.
Thumbnail images from the memory source are displayed.
4. Press the button on the control panel.
5. Press the button on the control panel twice to start the slide show.
6. Press the button on the control panel to stop the slide show or to return to the thumbnails
view.
54
buttons on the control panel to toggle between functions.
. The USB indicator on the control panel is lit.