Screen Messages - VTech CS6648-2 User Manual

Screen messages

Ans sys
off
turned off and will not
answer calls.
Ans sys on
turned on and will answer
calls.
Base is
calling
calling the handset.
Call log
empty entries.
Calling
base
base (for intercom calls).
transferring an outside
call to the base.
Calling
HS X
base is calling another
handset (for intercom
calls).
base is transferring an
outside call to another
handset.
Check AC
power
use while the telephone
base is in line power
mode.
Contact
deleted.
deleted
Directory
empty entries.
Directory
full
cannot save any new
entries unless you delete
some current entries.
Ended
a call.
Failed
is not successful.
HS X is
calling
is calling (for intercom
calls).
The answering system is
The answering system is
The telephone base is
There are no caller ID log
The handset is calling the
The handset is
The handset/telephone
The handset/telephone
The corded handset is in
A directory entry is
There are no directory
The directory is full. You
You have just ended
The handset registration
Another system handset
Incoming
call
Intercom
Intercom
ended
Intercom
to
Line in
use
Low
battery
Microphone
on
Muted
New
voicemail
No BAttEry
No line
No message
Not
available
Number
repeated
39
There is a call coming in.
The system device is on
an intercom call.
The intercom call has just
ended.
You have started the
intercom process, and
need to enter the device
number you wish to call.
An extension phone, or
one of the handsets is
in use.
The handset battery
needs to be recharged.
The mute function is
turned off and the other
party can hear you.
The microphone is off.
The other party cannot
hear you but you can
hear them.
There are new voicemail
messages from your
telephone service
provider.
The handset in the
handset charger has no
battery installed.
There is no telephone line
connected.
There is no message
recorded in the answering
system.
Someone else is using
the directory, caller ID log
history or the answering
system.
The telephone number
you have entered is
already in the directory.