Replace a handset
If you want to replace a handset,
or reassign the designated handset
number of a registered handset, you
must deregister all handsets that are
registered to the telephone base. Then
register each handset individually.
To make deregistration easier, read all of
the instructions on this page before
you begin.
To deregister all handsets:
1.
Press and hold FIND HANDSET
on the telephone base for about 10
seconds until the telephone base
shows Registering... then
De-register? The IN USE light
flashes.
2.
Immediately press and release
SELECT. The telephone base
displays Please wait.
3.
All handsets show To register HS
and See manual alternately when
the deregistration process completes.
The deregistration process takes
about 10 seconds.
To register the handset(s) to the
telephone base again, follow the
registration instructions on the previous
page.
NOTES
•
You cannot deregister all handsets if any
other system handset is in use.
•
If deregistration fails, you may need to reset
the system and try again. To reset, unplug
the power from the telephone base and
plug it back in.
•
Even if the battery is depleted, you can
still deregister all handsets by following
the steps above. After the handset is
charged for at least 10 minutes, its screen
alternately shows To register HS and
See manual.
Other information
Website
Use this feature to view the VTech
website address.
Press MENU when the handset/
1.
telephone base is not in use.
2.
Press
or
address, then press SELECT. The
screen displays the VTech website
address.
38
to scroll to Web