IR-Remote Controller
You can start/stop recording and initialize the time code using the infrared remote controller
(RMT-845 (sold separately)).
To make the setting, select [SETUP] first.
1 Press the NEXT button to display [SETUP], then press the ENTER button.
2 Press the NEXT button to display [IR-RC] (IR-Remote Controller), then
press the ENTER button.
3 Press the NEXT button to select the setting, then press the ENTER
button.
Allows you to operate the camera using the infrared remote controller.
Prevents operation of the camera using the infrared remote controller.
Returns to the [IR-RC] menu.
Notes
• The infrared remote controller RMT-845 (sold separately) is required to use this function.
Purchase it at a Sony service center.
• You can operate only the following settings using the RMT-845 (sold separately). Other settings are
inoperable.
– Initialize the time code.
– Start/stop recording.
Setting
t
display
31
GB