Setting The Water Softener - Miele G 7855 Operating Instructions Manual

Setting the water softener

^ Switch the machine off.
^ Turn the programme selector to the
STOP position f.
^ Press 4 and 6 at the same time,
hold them in and, whilst doing so,
switch the machine on with the I-0
button.
The current programme status "P..."
will show in the display.
The indicator light p / 6 will come
on.
^ Press 3 once. E01 for programming
level 1 will appear in the display.
^ Turn the programme selector six
switch positions clockwise (6 o'clock
position).
The number 19 will appear in the
display (the factory water hardness
setting in °d, equivalent to 3.4
mmol/l).
^ Press 4 as many times as is
necessary, or hold it in until the
required value (hardness level in °d)
appears in the display.
Once the number 60 (36 only for
U.K.) has been reached, the counter
will begin again at 0.
^ Press the 6 button. SP appears.
^ Press 6 again. The setting will now
be stored in the memory. The display
clears.
^ The machine is now ready for
operation.
Water softener
15