IMPORTANT SAFETY INFORMATION, SAVE THESE 6. Be extra cautious to reduce the risk of dropping a metal tool onto battery. This might cause sparks or short-circuit the battery or other electrical part, which can cause an INSTRUCTIONS explosion. 7. Remove personal metal items such as rings, bracelets, necklaces and watches when working with a lead-acid battery.
Page 3
4 . Determine which post of battery is grounded (connected) to the chassis. If negative post I N T R O D U C T I O N is grounded to chassis (as in most vehicles), see 5. If positive post is grounded to the chassis, see 6.
Page 4
current is reduced to allow for the maximum proper internal chemical energy transfer. Fault — Lights when the battery is not connected properly or not chargeable. At the end of Stage 2, the charger will automatically move into Stage 3 charge mode. R e v.
A P P R O X I M ATE CHARGING TIMES T R O U B L E S H O O T I N G The 2/4/6 Amp 12 Volt Smart Battery Charger will automatically adjust the charge Fault LED Lit rate as the battery becomes charged and stop when the battery is fully charged.
Need help?
Do you have a question about the VEC1086BBD-CA and is the answer not in the manual?
Questions and answers