Appendix A Static Operation; A-1. Scope; A-2. Procedure - Motorola HF-SSB Owner's Manual

A-1. Scope

This Appendix provides instructions for preparing the micomTrooper for static
operation using a dipole or long-wire antenna.

A-2. Procedure

When using a micomTrooper transceiver with a dipole or long-wire antenna, the
antenna must be directly connected to the transceiver RF connector. Therefore, it
is necessary to disconnect the connection between the transceiver and ATU.
In the following procedure, refer to Figure A-1.
Cat. No. 6886863J01
Appendix A
Static Operation
A-1