Advertisement
Quick Links
DSR 550 Satellite Receiver
Download Installation Manual
To Be Used with Initial Production Units ONLY
Note: Screen content displayed in this manual will vary. This
depicts a beta version of the firmware, and does not represent
the final look and feel of the product.
22 October 2003
Proprietary Information
All information contained in this document is confidential and proprietary to Motorola, Inc. Broadband Communications Sector. No license, expressed or implied,
under any patent, copyright or trade secret right is granted or implied by the conveyance of this document. No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual, or otherwise without the prior written permission of Motorola, Inc. Broadband Communications Sector. (See Document Security Standard,
320190-000 for details.)
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. All other
product or service names are the property of their respective owners.
Copyright © 2000-2003 Motorola, Inc. All rights reserved.
Advertisement
Related Manuals for Motorola DSR 550
Summary of Contents for Motorola DSR 550
- Page 1 320190-000 for details.) MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners.
- Page 2 This Motorola document is intended to assist an installer on installation, download, and activation process for the DSR550 satellite receiver set-top box (STB). Record STB Please record the STB unit address (UA) located on the unit address label on the rear panel of the STB. It is in the format: 000-XXXXX-XXXXX-XXX.
- Page 3 verify that your signal strength is at an acceptable level by pressing option 2. Installer Setup, then option 1. Tune Satellite Signal. The Signal Level Number should be about 30. The signal strength meter bar should be green as well. Press the back key on the RCU to get back to the Setup Options screen.
- Page 4 Download After the front panel amber “light pipes” have been blinking Operation for about 1 minute, pull the plug and power cycle the STB. The “Download In Progress” screen will automatically appear on the channel ¾ or the Composite Input on the TV. The download screen is not visible on the Component Input on the TV.