Direct Commands
Menu item
Ringer tone
(for base unit)
Incoming call tone
(for base unit)
Talking Call Display
(for base unit)
During programming:
When "Save" or "Sauv." is displayed, press the right soft key to save the new
settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
58
Command
[0] [*] [1] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
[0] [*] [2] [1] : On [2] : Twice [0] : Off
[0] [*] [4] [1] : On [0] : Off
Selection items
Page
p. 19
p. 52
p. 28