Listening To Voice Mail Messages; V.m. Access - Panasonic KX-TG2336C Operating Instructions Manual

Listening to Voice Mail Messages

Handset Base Unit
The unit will let you know that someone has left new voice mail for you:
a) "Voice Mail" will be displayed on the handset,
b) the Ringer/Message Alert indicator on the
handset will flash slowly if Message Alert is
turned on (p. 20) and the handset is not in
use, and
c) the VM indicator on the base unit will flash.
To listen to your voice mail message(s)
Handset
Press [MENU].
1
Press Select at "V.M. access".
2
• The handset is connected to the telephone line
and dials the access number (p. 43) in
speakerphone mode.
• If the handset beeps 3 times and "Store VM
access#" is displayed, a voice mail access
number is not stored. To store the number, see
page 43.
Follow the pre-recorded instructions.
3
When finished, press [OFF].
4
• You can also listen to your voice mail message(s) by using [C] or [s].
1. Press [C] or [s].
2. Press VM within 15 seconds.
• After 15 seconds, "VM" will disappear and "(VE)" will
be displayed.
• If a voice mail access number is not stored, "VM" will
not be displayed. To store the number, see page 43.
3. Follow steps 3 and 4 of "To listen to your voice mail message(s)" above.
Voice Mail Service
e.g. Handset on the base unit
Voice Mail
Charging
e.g. Handset off the base unit
Voice Mail
Rcvd Phone
calls book
K

V.M. access

Back Select
K
dB
Dial VM access#
(VE)
K
Talk
00-00-08
VM
K
L
L
Mute
L
Mute
L
45