MSI MS-7320 (V1.X) Manual page 52

M S-7320 M ainboard
On-Chip ATA Devices
Press <Enter> to enter the sub-menu and the following screen appears:
On-Chip IDE Controller
This item allows you to enable/ disable the IDE controller.
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
On-Chip SATA Controller
This item allows you to enable/ disable the SATA controller.
RAID mode
This item allows you to enable/ disable the RAID function. Select [RAID] will
enable RAID.
I/O Devices
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
Select an address and corresponding interrupt for the first serial port.
Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides
Standard, ECP, and EPP features. It has the following options:
[3BC]
[278]
[378]
Parallel Port M ode
[Normal]
[EPP]
[ECP]
[Bi-Directional] Extended Capability Port + Enhanced Parallel Port
To operate the onboard parallel port as Standard Parallel Port only, choose
[Normal]. To operate the onboard parallel port in the EPP mode simultaneously,
choose [EPP]. By choosing [ECP], the onboard parallel port will operate in ECP
mode only. Choosing [Bi-Direction] will allow the onboard parallel port to support
both the ECP and EPP modes simultaneously.
3-12
Line Printer port 0
Line Printer port 2
Line Printer port 1
Stardand Parallel Port
Enhanced Parallel Port
Extended Capability Port