Hardware RAID setting Connectors: JP1, JP2
These connectors are used to set RAID mode for the hard drives that connected to
SATA6, SATA7.
JP1 JP2
Important
When two hard drives are installed to SATA6 and SATA7 for RAID function, the
indicator LED beside the JP1 and JP2 will light in blue.
JP1
JP2
shorting JP1 =
RAID 0 mode
Hardware Setup
JP1
JP2
shorting JP1 & JP2 =
RAID 1 mode
Indicat or LED
2-15