Menu Operation
OFF on the STATE.
Use [UP] or [DOWN] to select an option then use
•
[LEFT] or [RIGHT] button to adjust the option.
>
POSITION,/: Moves horizontal position
of the mask.
>
POSITION;.: Moves vertical position of
the mask.
>
SIZE,/ : Enlarge or decrease the
horizontal size of the mask.
>
SIZE;.: Enlarge or decrease the vertical size
of the mask.
4.
Use [SENSITIVITY] option to obtain the optimum
detection level.
5.
Use [LEFT] or [RIGHT] button to select the DISPLAY
option.
6.
Use [LEFT] or [RIGHT] button to select the ALARM
OUT option.
3D-DNR Setting
1.
Select [3D-DNR] option.
If pictures are not clear due to brightness, this option
would reduce the noise of picture.
2.
Use [LEFT] or [RIGHT] button to select a value.
27