Table of Contents
Advertisement
8.2
CONFIGURING THE WEB PAGE DISPLAY LANGUAGE
You can click on
"Language
the Symbio web page display language configuration page.
8.3
ADVANCED NETWORK CONFIGURATION
By default, your Symbio will try to retrieve an IP address automatically via
Ethernet cable in "DHCP Client" mode.
If your installation requires manual adjustment, click on
go to the network parameters configuration page.
To enter a manual configuration, check the "DHCP Client" box. You can then
configure the IP address of the Symbio base, the default bridge, or the DNS
server(s) (use commas to separate IP addresses if you have several DNS servers),
the LAN IP address and the local address filter.
An example is shown on the web page, so all you need to do is replace the values
as required.
Lastly, click on "Submit" to confirm and apply the settings.
For more information, please contact your Internet Service Provider or the manufacturer of your internet access hardware.
Settings" on the right-hand side of the page to link to
the
"Network
Parameters" to
Language Settings
Select a Langeuage
Network Parameters
DHCP Client
LAN IP address
192.168.1.133
Default geteway
192.168.1.1
DNS Server 1
203.198.23.208,203.198.3
Broadcast LAN IP address
192.168.1.255
Subet mask
255.255.255.0
Francais
English
Apply
Submit
27
Advertisement
Table of Contents
