Sound Adjustments; Adjusting The Sound - JVC KD-LX50R Instructions Manual

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your preference.
1
Indication
BAS Adjust the bass.
TRE Adjust the treble.
FADER* Adjust the front and rear speaker
balance.
BALANCE Adjust the left and right speaker
balance.
BBE See "What is BBE
WOOFER Adjust the subwoofer output level.
VOLUME Adjust the volume.
Note:
* If you are using a two-speaker system, set the fader level to "00."
2
2 1
Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:
BAS
(bass)
VOLUME
To do:
II ?" on the next page. BBE OFF, BBE 1, BBE 2, BBE 3
Adjust the level.
Equalization pattern changes as you adjust the bass or treble.
Note:
Normally + / – button works as the volume control. So you do not
have to select "VOLUME" to adjust the volume level.
FADER
TRE
(treble)
WOOFER
–06 (min.) — +06 (max.)
–06 (min.) — +06 (max.)
R06 (Rear only) — F06 (Front only)
L06 (Left only) — R06 (Right only)
00 (min.) — 08 (max.)
00 (min.) — 50 (max.)
BALANCE
BBE
Range
25