Securing Child In Infant Restraint - Graco Dynamo Lite Classic Connect Owner's Manual

6.2 Securing Child in Infant Restraint

Failure to properly secure your child in the infant restraint/carrier
increases the risk of serious injury or death from suffocation or falls,
or in the event of a sudden stop or crash. Even when used only as
a carrier, make sure the harness straps are properly secured.
1. Move infant restraint handle to sitting position (see page 11).
2. Open harness clip by
squeezing both sides and
unbuckle as shown
2a. Tilt top of buckle toward
infant restraint and press in
at the top of the red button
and pull tongues out of
buckle
.
3. Place your child in the
infant restraint as shown
in , not
Pull the harness straps
down over your child.
.
.
29
29 29 29 29 29 29