Pride Mobility Quantum 6000 Owner's Manual page 26

Pride mobility quantum 6000 power chair owner's manual
Hide thumbs Also See for Quantum 6000:
Table of Contents

Advertisement

V .
C O M F O R T
Armrest Width Adjustment
You can change each armrest's width independently of the other.
NOTE: Changing the armrest width may increase the
overall width of your power chair.
To change the armrest width:
1. Locate the two armrest knobs on each side of the
armrest receiver bracket. See figure 17.
2. Loosen the knobs.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs.
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor. See figure 17.
2. Loosen the locking nuts.
3. Turn the adjusting screw clockwise to lower the front
of the armrest, or turn the adjusting screw counterclock-
wise to raise the front of the armrest.
4. Tighten the locking nuts to lock the adjusting screw into place.
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different heights
in 1-cm increments.
To raise or lower the foot platform:
1. Remove the quick release fasteners from the foot plat-
form bracket. See figure 18.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the quick release fasteners into the foot plat-
form bracket and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the quick release fasteners from the foot plat-
form bracket. See figure 18.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the quick release fasteners into the foot plat-
form bracket and tighten.
Quick Release Fasteners: The foot platform is attached
to the power base with two quick release fasteners. See
figure 18. Each quick release fastener consists of a bolt, a
lever, and a nut. See figure 19. The lever has a cam on the
end that allows it to clamp into place. The quick release
fastener has two states: clamped and unclamped. When the
lever is open, the quick release fastener is unclamped. When
the lever is closed, the quick release fastener is clamped.
26
A D J U S T M E N T S
FOOT
PLATFORM
BRACKET
Figure 18. Foot Platform Adjustment
Figure 19. Quick Release Fastener Operation
www.quantumrehab.com
QUICK RELEASE
FASTENERS
NUT
BOLT
UNCLAMPED
LEVER (OPEN)
LEVER (FULLY CLOSED)
CAM
CLAMPED
Quantum 6000

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents