Pride Mobility Quantum 6000 Owner's Manual page 16

I I I .
Class of Use:
Suspension:
Drive Wheels:
Caster Wheels:
Maximum Speed:
Brakes:
Ground Clearance:
Maximum Safe Slope:
Maximum Climbing
Ability:
Maximum Obstacle
Climbing Ability:
Turning Radius:
Overall Size:
Seating Options:
Drivetrain:
Batteries:
Range:
Battery Charger:
Motor Controller:
Weight Capacity:
Component Weights:
*Depending on user weight and terrain.
** This power chair has been successfully tested to a maximum user weight capacity of 100 kg in order to comply with
Australian testing standards. Additionally, the power chair manufacturer has successfully tested the power chair to a maximum
weight capacity of 136 kg. Further information regarding the performance attributes and testing results of the power chair may
be obtained by sumbitting a written request to Pride Mobility Products Australia Pty. Ltd., Attn.: Technical Services.
16
Y O U R
QUANTUM 6000 SPECIFICATIONS
B
Front and Rear
36 cm, pneumatic (36 cm solid optional)
15 cm solid (rear); 13 cm solid (front)
Up to 10 km/h*
"Intelligent Braking" electronic regenerative, disc park brake
9 cm
8.7% (5°)
8.7% (5°)
5 cm
56 cm (without foot riggings)
Length: 97 cm (without foot riggings)
Width: 65 cm
Synergy Seat
Power Elevating Seat
Synergy Manual Tilt
High-back Contour Seat
Manual Recline High-back Contour Seat
Synergy TRU-Balance Power Positioning Systems
Two motor, Mid-wheel-6 drive
Two Group 24 batteries (standard) (AGM or Gel-Cell recommended)
Two 12-volt, NF-22 required with Power Elevating Seat
Two Group 34 batteries required with Synergy TRU-Balance Power Positioning Systems
Up to 40 km*
Off-board
100-amp Remote Plus
100-amp Microdrive
136 kg (72 kg with Synergy Manual Tilt)**
Base: 77 kg
Synergy Seat: 27 kg
Batteries: 23 kg each
www.quantumrehab.com
P O W E R C H A I R
Quantum 6000