Eve Audio SC207 Product Manual

Eve Audio SC207 Product Manual

Hide thumbs Also See for SC207:

Advertisement

EVE
AUDIO PRODUCT MANUAL
OCT 2012
SC207
SC208

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC207 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eve Audio SC207

  • Page 1 AUDIO PRODUCT MANUAL OCT 2012 SC207 SC208...
  • Page 2: Table Of Contents

    SC207 SC208 Audio product manual SAFETY INSTRUCTIONS TABLE OF CONTENTS INTRODUCTION ................4 To avoid the risk of electrical shock, do not attempt to open the unit. There are no user-serviceable parts inside. Do not attempt to service the QUICK START .................5 equipment yourself.
  • Page 3: Introduction

    2.3. Powering On We wish you enjoy your new EVE Audio monitor. If you have any questions Engage the Power switch on the rear side of the loudspeaker to turn it on regarding our products, do not hesitate to contact your nearest dealer or or off.
  • Page 4: Operation

    Standby Mode. The volume will decrease gradually while the LED ring lights up once around the Volume control. Afterwards, the LED on the right In order to protect the tweeter, your EVE Audio monitors are supplied with end will light dimly and the power consumption is reduced to 1 watt.
  • Page 5: Volume Mode

    -48 dB 3.7. Filters The filters of the EVE Audio monitors were specially developed to offer you the possibility of adjusting your monitoring system to the characteristics of your room. These filters help correct the alterations to the frequency 1 Step = 2 dB 1 Step = 0.5 dB...
  • Page 6: Low Filter

    The Desk Filter has two functions. When turned down it acts as a narrow- are from the loudspeakers, the weaker the high frequencies. In such cases band EQ set to 170 Hz (SC207) or 160 Hz (SC208). the filter should be set to boost them. In desktop applications, distances The reflections of mixers and similar surfaces usually result in the boosting can be as short as 1 m (3 ft), which results in the high frequencies being...
  • Page 7: Led Mode

    3.13. Saving Your Settings your EVE Audio monitors to the local power grid. Set it to “230” if your local All settings on the front and rear panels are automatically saved. The power grid is 220-240 volts or “115” if it is 110-120 volts.
  • Page 8: Positioning

    (3.4-6.5 ft) for the SC207 and 1.5-2.5 m (4.9-8.2 ft) for the SC208. If the room conditions force you to place the SC207 or SC208 monitors in These values are only meant as a reference and depend a lot on the horizontal position, make sure that the tweeter is pointing to the outside characteristics of the room.
  • Page 9: Stereo Setup + Subwoofer (2.1)

    The high frequencies are forwarded to the full-range satellite speakers. Ideally, a 5.1 system would comprise five EVE Audio SC207 or SC208 and Ideally, such a system would comprise two EVE Audio SC207 or SC208 a TS110 or TS112 subwoofer.
  • Page 10: Room Acoustics

    -inf. – +6dB High-shelve filter (-5db – +3dB) > 3kHz > 3kHz If this is the case with your setup, use the Desk Filter of your EVE Audio Desk filter boost (0db – +3dB) 80Hz 80Hz monitors to reduce the impact of the reflections from the desk or mixer.
  • Page 11: Declaration Of Conformity

    Only products with original packaging are eligible for warranty EN 55013: 2001 + A1:2003 + A2:2006 service. If the product is not packaged in its original box, EVE Audio will not EN 55020: 2007 + A11:2011 be liable for any damages occurred during transit.
  • Page 12 SC207 SC208 Audio product manual NOTES NOTES...
  • Page 13 B e r l i n Phone: +49-30-6704 4180 Fax: +49-30-6704 4188 Email: info@eve-audio.com Web: www.eve-audio.com Oct 2012 © EVE Audio. All rights reserved. EVE Audio reserves the right to make changes in or additions to the information provided at any time.

This manual is also suitable for:

Sc208

Table of Contents