1-3 Installing and Setting Up the Software
Windows Me/98
Start Windows.
1
Insert the Roland Software Package CD-ROM
2
into the CD-ROM drive.
The setup menu appears automatically.
Switch on the machine.
3
Wait a short while until the lights stop flashing.
The flashing continues for about one minute.
From this point on, keep the machine's door closed
until installation ends. Failure to do so switches off
the power, which may prevent installation from com-
pleting correctly.
Connect a USB cable (sold separately).
4
The [Add New Hardware Wizard] dialog appears.
Click [Next].
5
1. Preparing the Machine
20
USB connector
USB cable
The rear of
the machine
USB port
Press the power button.
These lights flash clock-
wise two at a time.
Computer