Finishing The Data; Selecting And Scanning A Specific Area - Roland Picza LPX-1200 User Manual

2-4 Finishing the Data

You take the data from basic scanning and modify it to produce finished data that has the form you want.

Selecting and Scanning a Specific Area

After the basic scanning, you can select specific areas and performing additional scanning (rescanning). The available
types of rescanning are as follows.
Rescan
You use rescanning when you want to increase the number of measuring points (scan points) and enhance the degree of
completion of the 3D data.
Even when holes are present...
Line Scan/Point Scan
You use line scanning and point scanning when you want line-segment or point data to serve as supplemental data for
three-dimensional modeling operations using CAD or computer-graphics programs.
Perform line scanning with Dr.
PICZA3...
Perform point scanning with Dr.
PICZA3...
2. Creating 3D Data
36
Perform coarse scanning
of the entire object.
Rescan required
areas in detail.
You can reproduce detailed
surface patterns.
...you rescan
just these areas.
The holes are sealed, yielding
the same shape as the original!
...and re-create the
curved surfaces with
the 3D CAD program!
...and re-create the
curves with the 3D
CAD program!