Clearing The Memory - X10 PUR08 Owner's Manual

CLEARING THE MEMORY

It is recommended that you clear the
memory in the Learning Remote before you
start programming it:
1. Press and hold
SETUP until the
LED indicator
lights steadily.
Release the
SETUP button.
2. Press and
release the
LEARN key
twice.
3. Press and release
the SETUP key.
The LED turns off
after a few
seconds.
12
You can also clear the memory for just a
particular mode (TV, VCR, etc.).
1. Press and hold
SETUP until the
LED indicator
lights steadily.
Release the
SETUP button.
2. Press and release
the desired mode
button (TV, VCR,
etc.). The LED
blinks once.
3. Press the LEARN
key. The LED
blinks once.
4. Press SETUP. The
LED turns off.
13