Maintenance; Care And Cleaning; Condenser Cleaning; Winterizing - Viking F20733EN Use & Care Manual

MAINTENANCE

There are 5 things to keep clean:
1. The outside cabinet & door.
2. The ice storage bin.
3. The condenser.
4. The ice making system.
5. The ice scoop.
How to clean the cabinet
Wipe off any spills on the surface of the door and handle as they occur.
If anything spilled on the door or gasket dries onto the surface, wash
with soap and warm water to remove.
How to clean the ice storage bin
The ice storage bin should be sanitized occasionally. It is usually
convenient to sanitize the bin after the ice making system has been
cleaned, and the storage bin is empty.
A sanitizing solution can be made of 1 ounce of household bleach and
two gallons of hot (95° F. – 115° F.) water. Use a clean cloth and wipe
the interior of the ice storage bin with the sanitizing solution, pour
some of the solution down the drain. Allow to air dry.
8

CARE AND CLEANING

Condenser cleaning

The condenser is like the radiator on a car, it has fins and tubes that can
become clogged with dirt and lint.
To clean:
1. Remove the kickplate and front service panel.
2. Locate the condenser surface.
3. Vacuum the surface, removing all dust and lint.
CAUTION
DO NOT dent the fins.
4. Return the kickplate and front service panel to their original
positions. Fasten them to the cabinet using the original screws.

Winterizing

1. Clean the ice making system.
2. Open the door and push and release the On/Off switch to turn the
machine off.
3. Turn off the water supply.
Condenser Condenser
surface surface
9