Door Removal; Door Replacement And Adjustment - Viking F20507 Use & Care Manual

Door Removal

WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are properly
installed in the hinges. Failure
to do so can result in personal
injury to hands and/or fingers.
2
Remove hinge trim screws
and hinge trim.
4
Lift door up and out.
44
1
Open door completely.
Place pin in pin hole.
3
Close until pins stop door.

Door Replacement and Adjustment

1
Reinstall door to range.
3
Remove pins from hole in hinges.
5
If the door needs to be adjusted, loosen hinge
trim screws (see step 2). Adjust the screws
located between the door and kickplate
using a 5/32" hex head allen wrench. After
adjustment, tighten hinge trim screws.
2
1
Open door completely.
Reinstall hinge trim.
4
Close door.
45